vibrating fluid bed dryer
Carrier Vibrating

Rental Equipment

screener2screener3 lumpbreaker

Carrier makes it easy for you to process-test your products in your own plant with custom designed rental equipment packages.

Verifying process parameters in your own facility assures system performance as well as confidential development work. Each component of the rental system is assembled on a portable frame for easy installation. Set each piece in place, connect utilities, and you are ready to operate. Nominal rental fees may be applied toward purchase of new equipment through a rental/purchase agreement. Please inquire about our Rental Agreement Policy #2004.

Our standard Continuous Fluid Bed System rental package,
vibrating or non-vibrating, includes:

  • 10’-0” long fluid bed dryer or cooler.
  • Adjustable drive with 2 HP motor.
  • Patented drilled deck.
  • Stainless steel exhaust hood.
  • Integral heat source.
  • Supply blower with 10 HP motor.
  • Gas-fired burner (1M BTU) or steam coils.
  • Process control panel with starters.
  • Temperature controllers and indicators.
  • Charging Feeder with Hopper and Speed Control with 1 HP Motor.
  • Ductwork.
  • Dust collector.
  • Exhaust fan with 7.5-10 HP motor.

Note: Control panel includes motor starters and instrumentation to measure air volume, static pressure, air, and product temperatures. All equipment wired for 460 volt operation. Gas-fired burner requires 1 PSI gas.

Read more on our vibrating fluid bed dryers, vibrating fluid bed coolers and conventional fluid bed dryers / coolers.

Our standard Batch Fluid Bed System rental package includes:

  • Fluid bed unit with processing area of 1 square foot.
  • Patented drilled deck.
  • Adjustable vertical stroke drive with 2 HP motor.
  • Exhaust hood with view ports.
  • Integral steam or electric heat source.
  • Supply blower with 5 HP motor.
  • Electric heater (30KW) or steam coils.
  • Process control panel with starters.
  • Temperature controllers and indicators.
  • Dust collector.
  • Exhaust fan with starter with 5 HP motor.

Note: Control panel includes motor starters and instrumentation to measure air volume, static pressure, air, and product temperatures. System requires 460 volt service.

Lab Testing Fluid Bed

Typical 1 x 10 ft. Rental Fluid Bed Dryer with Heat Source & Controls

Shipping Test Material

Three cubic ft. or a 55-gallon drum of representative material is required for testing. Material should be shipped freight prepaid, in a returnable shipping container, to:

Carrier Vibrating Equipment, Inc.
3400 Fern Valley Road
Louisville, KY 40213
TO: LAB FOR TESTING


Note:
A Material Safety Data Sheet (MSDS) must be affixed to the outside of the shipping container. No test material can be opened or handled without proper documentation of material composition and the associated safety precautions to be taken by our staff. If you do not have a formal MSDS, a blank form can be faxed to you for completion. Test material will be returned to you upon completion of tests.

Carrier Vibrating Affiliate Logos